Shop spare parts by brand

Our online parts catalogues, hosted on our ToolUp store, show every part on the manufacturer's exploded diagram so you can match the part number to your exact model before you buy.

Online catalogue

Makita Spare Parts

Genuine Makita parts for cordless and corded tools, compressors and outdoor power equipment — browse the full exploded diagram for your model number.

Browse Makita parts
Online catalogue

Milwaukee Spare Parts

Genuine Milwaukee M12 and M18 tool parts, from switches and chucks to housings and gear assemblies, with every diagram part available to order.

Browse Milwaukee parts
Online catalogue

Paslode Spare Parts

Genuine Paslode nail gun parts and service kits for gas framers, finish nailers and cordless nailers — the same parts our workshop uses for Paslode servicing.

Browse Paslode parts
Order in store

DeWalt Spare Parts

Replacement parts for DeWalt cordless tools, saws and nailers. Send us your model number and we'll source the part and let you know price and availability.

Enquire about DeWalt parts
Order in store

Bostitch Spare Parts

Parts and rebuild kits for Bostitch framing nailers, finish nailers and staplers, including drivers, seals and O-rings.

Enquire about Bostitch parts
Order in store

Senco Spare Parts

Replacement parts for Senco pneumatic and cordless nailers and staplers. Tell us the model and the part you need and we'll take it from there.

Enquire about Senco parts
Order in store

HiKOKI Spare Parts

Parts for HiKOKI (formerly Hitachi) power tools and nailers, including older Hitachi models still working hard on Geelong job sites.

Enquire about HiKOKI parts
Order in store

Metabo Spare Parts

Replacement parts for Metabo grinders, drills and cordless tools. Send through your model number and we'll check what's available.

Enquire about Metabo parts

Tool Spare Parts in Geelong

Genuine spare parts for Makita, Milwaukee and Paslode tools, plus Bostitch, DeWalt, Metabo, HiKOKI and Senco — from Hornibrooks Tools & Fasteners, Geelong's locally owned tool and fastener specialist in Grovedale.

Find your part on an exploded diagram and order online, or bring your tool or the worn part to our counter and our service team will track it down for you.

  • Genuine manufacturer parts
  • Warranty agents for Makita, Milwaukee & Paslode
  • Onsite service centre in Grovedale
  • Local advice from people who fix tools

Keep your tools working, not sitting in the shed

A worn brush, a cracked trigger switch or a tired O-ring shouldn't mean buying a whole new tool. Most power tools and nail guns can be brought back to full working order with the right replacement part — and getting the right one first time is what we do every day.

Hornibrooks has supplied Geelong tradies and DIYers with trade tools, fasteners and repairs for years. Our service centre works on these brands daily, so when you ask for a part, you're talking to people who know exactly where it fits and what else is likely to be worn alongside it.

How to find the right part

  1. Find your model numberIt's on the rating plate or sticker on the tool's body, usually near the motor or handle. A photo of the plate is perfect.
  2. Match it on the diagramSearch the model in our online catalogue and locate the part on the exploded diagram to get the exact part number.
  3. Order online or through usBuy direct from the catalogue, or send an enquiry and we'll order it in for collection from our Grovedale store.
  4. Fit it — or let usConfident with a screwdriver? Fit it yourself. If not, our service centre can fit the part and test the tool for you.
Not sure what's broken? Bring the tool or the old part into the store. Our team can usually identify a part on the spot, and if the job is bigger than a single part, we can quote a full service or repair instead.

Why buy tool parts locally in Geelong?

Ordering parts from overseas sellers is a gamble: wrong part numbers, superseded parts and long waits while your tool is out of action. Buying from a local Geelong supplier means you can talk to someone who has the tool on the bench, confirm the part before you pay, and get help if it doesn't fit.

Manufacturers regularly replace old part numbers with updated ones. When a part has been superseded, we'll point you to the current replacement. If a part has been discontinued, give us a call and we'll check what's still available or suggest an alternative.

And because we're warranty and service agents for Makita, Milwaukee and Paslode, we can tell you when a fault is likely covered by warranty — so you don't pay for a part you shouldn't have to.

Need it repaired instead?

Some jobs are better left to the workshop — motors, gearboxes, combustion chambers and anything involving a warranty claim. Our onsite service centre in Grovedale repairs power tools, nail guns, air compressors and generators across all the major brands. See our tool servicing and repairs in Geelong page to book your tool in.

Serving Geelong, the Surf Coast and Bellarine

Our store is in Grovedale, a short drive from the Geelong ring road, Waurn Ponds and Armstrong Creek. Tradies and DIYers regularly come to us for tool spare parts from across the region, including:

  • Geelong & Geelong West
  • Grovedale
  • Waurn Ponds
  • Armstrong Creek
  • Mount Duneed
  • Highton & Belmont
  • Torquay & Jan Juc
  • Ocean Grove
  • Barwon Heads
  • Leopold & Drysdale
  • Lara & Corio
  • Bannockburn
  • Winchelsea

Outside the region? Parts ordered through our online catalogue ship Australia-wide.

Tool spare parts FAQs

Can I buy tool spare parts in store in Geelong?

Yes. Visit Hornibrooks Tools & Fasteners at Shop 2-3, 147 Marshalltown Road, Grovedale. Bring your tool, the worn part or the model number and our team will find the right part and order it in for collection if it isn't on the shelf.

Do you sell genuine spare parts?

Yes. Our Makita, Milwaukee and Paslode parts are genuine parts sourced through each manufacturer's service channels — the same parts our service centre uses for warranty and repair work.

How do I find the right part for my tool?

Find the model number on the tool's rating plate, search it in our online parts catalogue and match the part on the exploded diagram. If you're unsure, send us a parts enquiry with a photo of the rating plate and the broken part and we'll confirm it for you.

Can you get parts for DeWalt, Bostitch, Senco, HiKOKI and Metabo tools?

Yes. These brands aren't in our online catalogue yet, so send us a parts enquiry or call (03) 5241 9555 with your model number and the part you need. We'll source it and let you know price and availability.

What if my part has been superseded or discontinued?

Manufacturers often replace old part numbers with updated versions. We'll direct you to the current replacement part where one exists. If a part is discontinued, contact us and we'll check remaining availability or suggest an alternative.

Can you fit the part for me?

Yes. Our onsite service centre in Grovedale can fit replacement parts, test the tool and handle full servicing and warranty repairs for Makita, Milwaukee, Paslode and other major brands.

Visit our Grovedale store

Hornibrooks Tools & Fasteners
Shop 2-3, 147 Marshalltown Road
Grovedale VIC 3216

Phone: (03) 5241 9555
Email: sales@hornibrooks.com.au

Get directions

Opening hours

Mon – Fri7:00 am – 5:30 pm
Saturday9:00 am – 12:00 pm
SundayClosed

Send a spare parts enquiry

Tell us the brand, model number and the part you need (a part number or photo helps) and we'll get back to you with price and availability.

Parts